Our customers made these suggestions for improving FlexxWorkspaces. Suggestions for improving FlexxWorkspaces.
Create a "force logoff" operation
Create a "Force logoff" operation for user sessions. It would be helpful when the normal "logoff" is unable to close the user session because some process is blocking ...
Done
Reassign a AVD Personal Session Host
There is no option in the Azure portal to achieve that. It may be a great feature
Under consideration
Add 'Start VM on Connect' feature in Power Management
Add 'Start VM on connect' feature in Power management to reduce Azure cost.
It should be useful to maintain the current requirements.
Under consideration
FSLogix optimization compatible with Cloud cache
FSLogix optimization compatible with Cloud cache
Done
Multi-tenant
Add multi-tenant feature to manage different customers from SmartWorkspaces. It should be useful if a customer could be a resource group or subscription.
Done
Enable RDP shortpath through host pool
Enable RDP shortpath through host pool with easy step like Remote Assistant
Not planned
Widget with historical view on the load % of each host pools
Now we have a widget showing the real-time information of the load for each host pool. It would be great to have this information but with a historical view to view ...
Under consideration
Alert definitions for fileshares capacity
Have alerts to inform when a fileshare is reaching its capacity (two different ones: Warning and Critical), so the support team can act and increase it when ...
Not planned
Configure automated auto-scale for host pools
Allow to configure when the session hosts in a host pool should be automatically powered on or powered off based on the real usage (number of users per vCPU) like on ...
Not planned
Power management for Servers (VM)
Allow configuring power management for VM of Azure (not only WVD)
Under consideration
Default installation should provide a self-signed certificate
It would be interesting to have a certificate from the beginning until the user/customer installs his corporate certificate.
Done
Launch custom scripts run at boot time or logon
Allow to run custom operations (scripts) when:
- The session hosts boots up
- User connect to session hosts
Planned
Manage physical and virtual devices in SmartWorkspaces
Allow to manage all devices (physical and virtual) from SmartWorkspaces. It would be great to have information about endpoint (where user is connected from).
Done
Disconnect time limit
You can limit the amount of time that disconnected sessions remain on the session hosts. This is useful because sessions that remain running indefinitely on the ...
Done
Custom Operations Filter
There should be a system-maintained prebuilt filter that shows the "Default" Custom operations. This filter cannot be changed or deleted by any user and is "system" ...
Under consideration
Filter Builder - Custom Operations, Connection logs, Profile Storage
Del. date, Del. user should have "del" spelled out.
Modif. date and Modif. user should have "Modif" spelled out.
Done
Need a better name than VCC and VCC Roles
If VCC is Virtual Client Computing, doesn't that change now that FlexxWorkspaces handles physical devices/workplaces?
Looking at VCC roles in the FlexxWorkspaces ...
Under consideration
VCC Roles Overview Question
Why are the section headings different colors, indentations, and why do some have a section heading separator line?
ACTIVE/PASSIVE SERVICES and ACTIVE/ACTIVE ...
Under consideration
In VCC roles overview, some column headings should span two lines
I believe we are wasting horizontal screen space. The following sections have columns where the column heading could span two lines instead of having one very long ...
Under consideration
Need Spaces in Column Names in VCC roles overview
There should be a space after "IIS" in the highlighted columns in the attached image.
Under consideration
Custom operation Filters
When looking at Custom operations, I wanted to see if there was a Filter to see only the Default Custom Operations. I clicked on My FIlters, Manage Filters. From that ...
Under consideration
Custom Operations Scrunched Up Text
There is plenty of space available, so why is the text in the attached screenshot scrunched up?
Done
Add "Scope" text to "Scope" options
In the documentation, it is stated the creation form requires "A scope", but "Scope" is nowhere to be found on the form.
I recommend adding a "Scope" label just ...
Planned
Add a Cancel button/option to New Custom Operation
Configuration -> Custom operations -> New
Once there, there is no way to cancel. The only way out is to click on Custom operations again.
If I start creating a ...
Planned
Notify users when FSLogix profile size reaches the threshold and the limit
It would be interesting to notify users if they are at 90% of the profile capacity or have reached the maximum allowed size.
Under consideration
Power Management - Triggered by CPU usage or number of connected users
Can this be triggered by an event such as a high CPU or number of users with threshold or minimum time period to Turn on session hosts?
Under consideration
SNMP support and integration into 3rd party tools
Integrate SmartWorkspaces alerts with SNMP system
Under consideration
Add active monitoring tool for published apps or VDI
A monitoring feature that checks the login in VDI or Apps generating a report with useful information
Under consideration
Show information about mapped drives and printer drivers
I would like to see which mapped drives and printers has the user session
Under consideration
Notify users when Power management power off the session host
This would be useful for the user experience.
Under consideration
Run custom operation while powering on Session host or VM
This would be very helpful for start-up configuration or logon scripts (AV, etc)
Under consideration
Custom user roles
I would like to create a new role with specific permissions. For example, a new Level 1 support with permissions to view only Sessions.
Under consideration
Custom operations (scripts) execution triggered by alerts
Custom operations execution triggered by alerts
New custom operation 'WVD diagnostic tool'
This custom operation (script) should check the configuration of session hosts, event log and connectivity with WVD API
Enable WVD screen capture protection
Enable WVD screen capture protection through host pool with easy step like Remote Assistant
Done
Provide feedback about SmartWorkspaces
Create a user voice portal to provide feedback about SmartWorkspaces
Done
Can I import a bunch of my scripts into custom operations?
Currently, SmartWorkspaces allow me to upload script (one at time) but I would like to upload all my script in one action.